Swing RTL

Semisitting Swing RTL retains all the improvements and innovations of the Swing model with the difference that it incorporates our Lateral Tension Regulation (RTL) system.

This mechanism, in addition to offering a different experience when customizing the characteristics of the seat depending on the user, allows the possibility of incorporating armrests with a 2D and 4D system.

Technical data sheet

2 height-adjustable backrest options: low and high. Also without backrest.
Tilting RTL mechanism with lateral tension regulation.
Ergonomic height-adjustable seat.
2 types of footrest ring: 510/460mm aluminum or 460mm polyamide.
Different base options: in aluminum in two sizes (615/490mm), in 540mm polyamide and base with 680mm footrest in both aluminum and polyamide.
Optional armrests with 2D system, which allows height and width regulation or 4D which also allows customization in angle and depth.
Wheels with soft or hard tread, with auto braking system, with counter auto braking system or fixed stops.
ESD (Electrostatic resistance) properties option.
Different gas cylinders to adjust the height of the stool to the user and workplace.
Upholstered finish.

Tilting seat

With its lever located at the bottom left of the seat, the seat inclination is unlocked

Height adjustment

The seat height can be raised or lowered thanks to the lever located at the bottom right

Tilting tension regulation

The adjustment of the hardness in the tilt is carried out by means of a rotating crank that is located in the lower right part

Backrest height adjustment

The knob located on the back of the backrest helps us regulate and set the height of the backrest

Footrest ring with regulation

Possibility of including a footrest ring. It has a knob that allows you to adjust its height

ESD Properties (Electrostatic Resistance)

Optionally, different components and upholstery can be configured to satisfactorily comply with current regulations regarding resistance and electrostatic conductivity.